Page 2 of 21
Summary & Introduction
Introduction
Southern States Type CVB-2 switch is a three-pole, single-throw, three insulator, end rotating
stack, vertical break, group operated, outdoor air disconnect switch.
The current carrying parts are of copper alloy with copper-to-copper sealed threaded hinge
current transfer points and silver-to-silver current transfer points at the jaw end. Due to their
unique structure, reverse loop contacts on the jaw end of this switch provide high-pressure
contact when subjected to high currents.
The Type CVB-2 switch also features weatherproof rotating insulator bearings, positive stops on
each switch pole in the open and closed positions, insulator leveling bolts (72.5 kV and above)
at each insulator stack and double channel bases (121 kV and above).
The instructions contained within this manual are necessary for the safe installation,
maintenance, and operation of the Type CVB-2 switch. A qualified person, familiar with this of
type equipment, should carefully read and follow the instructions.
These instructions are intended to provide a general guideline for the installation, adjustment,
and maintenance of the Type CVB-2 switch. All details, equipment variations, and potential
conditions may not be covered in this manual. Contact Southern States, LLC in the event
conditions associated with a specific application are not sufficiently addressed.
All photographs and sketches in this manual are for illustration purposes only and may not be to
scale. Refer to the Unit Assembly drawing or the Operating Mechanism drawing provided with
each disconnect switch for specific details. During installation, it may be necessary to make
adjustments other than those described in this manual. Contact your local representative or the
factory if questions should arise.
Southern States After Sales and Service Department is available for field installation assistance
along with providing parts support for all Southern States products.
Contact After Sales and Service at 770-946-4562, 7:30am-4:00pm EST Monday-Friday.
After Hours: 770-946-4565
Distinctive signal words are used to indicate the degree of hazard that may be encountered by
the user. Identification of the signal words and their definition follow:
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury. It may also be used to alert against unsafe
Summary of Contents for CVB-2
