South Bend Tools
For Machines Mfd. Since 02/21
Model SB1097
-3-
I N T R O D U C T I O N
Description of Controls
& Components
Refer to Figures 1–7 and the following
descriptions to become familiar with the basic
controls and components used to operate this
machine.
A. Cabinet E-Stop Button w/Disabling Key:
Turns machine OFF when pressed. Twist
clockwise to reset. When key is removed,
button is disabled and machine cannot start.
B. Touch Screen Digital Readout:
Turns
machine ON, displays speed setting, and
adjusts sanding belt speed.
A
A
B
B
Figure
Figure 1. Main electrical controls.
. Main electrical controls.
Serious personal injury could occur if
you connect the machine to power before
completing the setup process. DO NOT
connect power until instructed to do so later
in this manual.
Untrained users have an increased risk
of seriously injuring themselves with this
machine. Do not operate this machine until
you have understood this entire manual and
received proper training.
H. Belt Access Door E-Stop Button:
Turns
machine OFF when pressed. Twist clockwise
to reset.
H
H
Figure
Figure 3. Belt access door E-Stop button location.
. Belt access door E-Stop button location.
C. Pre-Set Speed Buttons:
Change speed
setting to 500, 1100, 2200, or 3300 RPM
when pressed.
D. Speed Setting:
Displays current RPM.
E. Adjustment Arrows:
Adjust speed setting up
or down in 50 RPM intervals.
F. OFF Button:
Turns machine OFF.
G. ON Button:
Turns machine ON.
Figure
Figure 2. Touch screen controls.
. Touch screen controls.
C
C
D
D
E
E
F
F
G
G
