-20-
For Machines Mfd. Since 7/21
South Bend Tools
Model SB1123
P R E P A R A T I O N
2.
Slide guide post handwheel (see Figure 19)
onto shaft and secure with pre-installed cap
screw.
3.
Pull fence handle up and place fence on rail
(see Figure 20).
4.
Push fence handle down to lock fence in
place (see Figure 20).
Installing Riser Blocks
The Model SB1123 comes with riser blocks that
can be used to increase the floor-to-table height
from 33" to 34
1
⁄
2
".
To install riser blocks:
1.
Lift bandsaw with forklift or other power
equipment.
2.
Insert (4) hex bolts, lock washers, and flat
washers (see Figure 22) through holes in
base of machine.
3.
Align hex bolts with threaded holes in riser
blocks (see Figure 22) and securely tighten.
Note:
Riser blocks are equipped with tabs for
securing the bandsaw to the floor to maximize
stability.
Figure
Figure 21. Riser block components.
. Riser block components.
Figure
Figure 19. Guide post handwheel installed.
. Guide post handwheel installed.
Guide Post
Guide Post
Handwheel
Handwheel
Figure
Figure 20. Fence installed on table.
. Fence installed on table.
Fence
Fence
Handle
Handle
Rail
Rail
Figure
Figure 22. Riser block location and installation
. Riser block location and installation
hardware.
hardware.
x 4
