South Bend Tools
For Machines Mfd. Since 11/20
Model SB1099
-17-
P R E P A R A T I O N
12.
Using pre-installed fasteners, place upper
end of drum lock handle over outer stud on
spring bracket, then attach lock handle link
to lower hole on lock handle (see Figure 16).
Figure
Figure 16. Lock handle attached to spring bracket and
. Lock handle attached to spring bracket and
lock handle link.
lock handle link.
Outer
Outer
Stud
Stud
Spring
Spring
Bracket
Bracket
Lock
Lock
Handle
Handle
Link
Link
Drum
Drum
Lock
Lock
Handle
Handle
17.
Connect pressure gauge tube to hose ports on
barrel and pressure gauge (see Figure 18).
18.
Attach 1
1
⁄
2
" hose to hose port on barrel with
1
1
⁄
2
" hose clamp (see Figure 18).
Figure
Figure 18. Pressure gauge tube and 1
. Pressure gauge tube and 1
1
1
⁄⁄
2
2
" dust hose
" dust hose
attached to barrel.
attached to barrel.
Pressure
Pressure
Gauge Tube
Gauge Tube
1
1
1
1
⁄⁄
2
2
" Dust
" Dust
Hose
Hose
1
1
1
1
⁄⁄
2
2
" Hose
" Hose
Clamp
Clamp
13.
Place (2) drum hose clamps around drum
hose, then slide hose over port on collection
drum lid and tighten bottom clamp (see
Figure 17).
14.
With collection drum lid mounting brackets
facing up, orient lid so dust port, drum hose,
and spring brackets align (see Figure 17).
15.
Secure collection drum lid to spring bracket
using pre-installed fasteners (see Figure 17).
16.
Attach drum hose to cyclone funnel and
secure with top hose clamp (see Figure 17).
Figure
Figure 17. Collection drum lid and lock handle
. Collection drum lid and lock handle
installed.
installed.
Spring
Spring
Bracket
Bracket
Collection Lid
Collection Lid
Mounting Bracket
Mounting Bracket
Flexible Hose
Flexible Hose
Hose Clamp
Hose Clamp
Hose Clamp
Hose Clamp
Pressure
Pressure
Gauge
Gauge
11.
Remove pre-installed tap screw from outlet
barrel, then attach inlet adapter to adapter
port on barrel with tap screw (see Figure 15).
Figure
Figure 15. Inlet adapter attached to adapter port.
. Inlet adapter attached to adapter port.
Inlet
Inlet
Adapter
Adapter
Adapter
Adapter
Port
Port
