-16-
For Machines Mfd. Since 11/20
South Bend Tools
Model SB1099
P R E P A R A T I O N
6.
Attach housing assembly to side panels with
(8)
5
⁄
16
"-18 x
3
⁄
4
" button head cap screws and
5
⁄
16
" flat washers (see Figure 11).
Figure
Figure 11. Housing assembly secured to side panel.
. Housing assembly secured to side panel.
x8
x8
Figure
Figure 10. Housing assembly installed to side panels
. Housing assembly installed to side panels
and lock handle guides.
and lock handle guides.
This machine and its
parts are heavy! Serious
personal injury may occur
if safe moving methods are
not used. To reduce the
risk of a lifting or dropping
injury, ask others for help
and use power equipment.
5.
With help of two assistants, lift housing
assembly onto side panels and lock handle
guides (see Figure 10).
IMPORTANT:
Dust collector is top heavy once
housing assembly is installed. Use assistants to
hold machine in place during Steps 5–24.
Housing
Housing
Assembly
Assembly
7.
Attach housing assembly to lock handle
guides with (4)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts
(see
Figure 12).
8.
Tighten flange bolts connecting lock handle
guides to base.
Figure
Figure 12. Housing assembly secured to rear panel
. Housing assembly secured to rear panel
and lock handle guides.
and lock handle guides.
x4
x4
Lock Handle
Lock Handle
Guide
Guide
(1 of 2)
(1 of 2)
9.
With help of an assistant, align intake barrel
so dust port points straight out from housing
assembly, then attach barrel with (8)
5
⁄
16
"-18
x
1
⁄
2
" flange bolts (see Figure 13).
Figure
Figure 13. Intake barrel attached to housing assembly.
. Intake barrel attached to housing assembly.
x8
x8
Intake
Intake
Barrel
Barrel
10.
Attach cyclone funnel to intake barrel using
(8)
5
⁄
16
"-18 x
3
⁄
4
" flange bolts and
5
⁄
16
"-18 lock
nuts (see Figure 14).
Figure
Figure 14. Attaching funnel to intake barrel.
. Attaching funnel to intake barrel.
x8
x8
Cyclone
Cyclone
Funnel
Funnel
