I
I
I
I
I
I
I
•
I
I
The Solo Logic is fitted with a full length meter bridge which
houses 10 element bargraph meters for every channel and
left/right outputs.
All of the meters have a peak reading response and so, unlike
VU meters, all signals should be running into the red. If any
of the meters are low down throughout the song then the
input gain should be increased otherwise the signal to noise
ratio will be downgraded.
Some experimentation may be
necessary to ensure that you have the maximum signal to
noise ratio without distortion.
The channel meters monitor the signal before the faders so
that you can see line, mic or tape inputs when they are routed
through the channel. If you wish to monitor the tape out or
tape return when recording you should monitor in mix mode
or use the meters on the tape machine.
The left and right meters monitor the mix signal after the
master faders to give you a true reading of the signal leaving
the console. The left and right meters also meter the solo
signal when a solo button is pressed.
LED indicators on the meterbridge in5 volts, +48
volts, SOLO and IPS (in place solo).
