SYSTEM PROGRAMMING -
Menu 1
PAGE 2
ARS.1
INSTALL MANUAL
TABLE OF CONTENTS
QUICK VIEW WIRING DIAGRAM..........................................................3-4
Connector Pin Configuration
Antenna Connector
Park Light Jumper
INSTALLATION NOTES............................................................................5
TACH LEARNING......................................................................................6
Data Tach Mode
Tach/ Tachless Learn
Hybrid Mode
QUICK VIEW PROGRAMMING..............................................................7-9
Enter Program Mode
System Reset
Menu 1,2,3 & 4 Quick View
SYSTEM WIRING DETAILS................................................................10-14
Connector Views
Wiring Description
SHOCK SENSOR.....................................................................................15
Adjusting Shock Sensor Sensitivity
TRANSMITTER PROGRAMMING...........................................................16
Adding/ Reprogramming Transmitter
DIAGNOSTICS.........................................................................................17
Diagnostic Chart
Diagnostic Memory
DOOR LOCK DIAGRAMS..................................................................18-19
Relay Diagrams
CONTACT INFORMATION.......................................................................20
SYSTEM PROGRAMMING -
Menu 1
PAGE 3
ARS.1
INSTALL MANUAL
QUICK VIEW WIRE DIAGRAM
1
5
3
2
4
6
1
2
3
4
5
6
7
8
9
10
11
12
13
1
3
2
4
OUTPUT TO ACTIVATE
IGNITION CIRCUIT
THE
SELECTABLE OUTPUT* (DEFAULT 2ND IGN)
12VOLT/ 30 AMP MAIN POWER INPUT
OUTPUT TO ACTIVATE THE STARTER CIRCUIT
12VOLT/ 30 AMP MAIN POWER INPUT
OUTPUT TO ACTIVATE
ACCESSORY CIRCUIT
THE
SYSTEM GROUND INPUT
SELECTABLE PARK LIGHT OUTPUT (DEFAULT POSITIVE)
(+) SIREN OUTPUT/ (+) PULSED HORN OUTPUT
* The selectable output can be changed in the program mode to output as a 2nd Accessory or
2nd Start output. Default output is second ignition.
This output does not change back to
2nd Ignition upon reset.
WARNING - NEVER INSTALL AN AUTOMATIC REMOTE STARTER INTO A MANUAL TRANSMISSION
VEHICLE!
BLACK
WHITE
ORANGE/BLACK
BROWN
PINK
PINK/WHITE
RED
PURPLE
RED
ORANGE
(-) STARTER KILL/ ANTI-GRIND OUTPUT
AUXILIARY 1 OUTPUT/ PROGRAMMABLE OUTPUT
(-) 2ND ACCESSORY/ PROGRAMMABLE AUXILIARY 2 OUTPUT
AUXILIARY OUTPUT TO ACTIVATE TRUNK RELEASE
REARM OUTPUT (PULSE WITH LOCK & AFTER START)
NEGATIVE SECOND START OUTPUT
DISARM OUTPUT (PULSE WITH UNLOCK & BEFORE START)
POSITIVE DOOR PIN INPUT/ POSITIVE WHEN OPENED
DIESEL WAIT TO START (+ or -) / TRIGGER TO START
TACH DETECTION INPUT (CONNECT TO COIL, INJECTOR...)
BRAKE SWITCH INPUT (12VOLT WHEN BRAKE IS PRESSED)
HOOD PIN SWITCH (GROUND WHEN HOOD IS OPENED)
NOT USED
NEGATIVE DOOR PIN INPUT/ NEGATIVE WHEN OPENED
ORANGE/BLACK
ORANGE/WHITE
RED/WHITE
GREEN/WHITE
PINK/WHITE
GREEN/BLACK
PURPLE
GRAY/BLACK
PURPLE/WHITE
GRAY
GREEN
BROWN
BLACK/WHITE
