Soundstream Balanced X.0, User Manual

Page: 10 / 10

PROBLEM CAUSE
l
No
power or ground at crossover
No sound and power LED is not
l
No remote turn-on signal
lit
l
Blown fuse near battery
Phantom Power present or available.
Check the Mini-Din connections.
l
One or both of the “SUB CONTROL”
N
O
subwoofer output, or the
subwoofer output goes away when
fading to the front or the rear.
l
Check “Remote Bass” switch on
amplifier
Excessive engine noise using
l
Make sure the input settings on the X.0 are
or set to not variable.
1
SPECIFICATIONS
Crossover
Low Pass
High Pass
Subwoofer
Crossover Frequencies
Subwoofer Low Pass (Mono)
Subwoofer Low Pass (Stereo)
Subwoofer Subsonic (Mono)
Subwoofer Subsonic (Stereo)
High Pass
Mid-Range
Mid-Range Midrange/Tweeter)
High Pass
High Pass
THD
Signal-to-Noise
Input Impedance
Output Impedance
Crossover Output
Dimensions
12 per octave
12 per octave
12 per octave (Stereo
24 per octave (Mono)
Varia 50 Hz 200 Hz
Varia 66 Hz 240 Hz
Varia 20 Hz 50 Hz
Varia
27 Hz 70 Hz
Varia 60 Hz 300 Hz
Varia 200 Hz 1
Varia 800 Hz 4
Varia
200 Hz 1
Varia
800 Hz 4
(Note: The band pass
frequency and high pass frequency
are symmetrically set by one
control.)
20kHz
1
1 OOR
Variable
8 W x H x 5” D2
25mm W x 350mm x 127mm
Your Soundstream BALANCED X.0 crossover is protected by a limited
warranty. Please read the enclosed warranty card.
19