10
ENGLISH
ZEPHIRO 1500 LOW fog User manual
5-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
8. CONTROL MODE
A
B
WIRELESS CONTROLLER
Wireless remote control
Once warm-up process is complete, press A or B button to emit fog. By pressing them
long time, you can spray fog long time till the unit will warm up again. By releasing
buttons, it stops spraying fog.
DMX512 Control
One DMX Channel is used to control fog emission. This channel is selectable through
the DMX Dip-switch panel.
Switch value
Switch number
Final value is obtained by adding values of all switches in ON position. This way, you
are able to make combinations to reach the desired DMX value between 1 and 512. For
example, if you wish to set the device to channel 33, you need to select dip-switch 1
and 6 (1 + 32 = 33).
9. NOTICES
f
This fog machine should be used in dry and well-ventilated place . Please avoid any
water or rain fall in the machines, if water and rain fall in, turn off the power imme-
