6. Press and hold
Program
&
TAP SYNC/DISPLAY
buttons to exit and save set-
ting. All LEDs will blink.
NOTE: All wheels can be re-assigned to output on different DMX channels.
You can re-assign Pan / Tilt channel to all controller fader channels.
5.4. Resetting the System
Warning: This will reset the controller to its factory defaults. This will erase all programs
and settings.
1. Turn off the unit.
2. Press and hold
BANK UP
and
AUTO/DEL
.
3. Turn on power (while still holding
BANK UP
and
AUTO/DEL
).
5.5. Copy Scanner
Example: Copying Scanner 1 into Scanner 2
1. Press and hold
SCANNER
button
1
.
2. While holding button
1
press
scanner
button
2
.
3. Release
SCANNER
button
1
first before releasing
SCANNER
button
2
and LED
indicator of
SCANNER
2
will ON.
4. The target
SCANNER
LED indicators will flash to confirm successful copy.
NOTE: To save time, you can copy the settings of one Scanner button to an-
other.
5.6. Fade Time Assign
You can choose whether fade time during scene execution is implemented broadly
to all output channels, or only to the Pan & Tilt movement channels. This is relevant
because often you will want gobos and colors to change quickly while not affecting the
movement of the light.
1. Turn OFF the controller
2. Hold the
BLACKOUT
and
TAP SYNC/DISPLAY
buttons simultaneously.
3. Turn on the controller.
4. Press the
TAP SYNC/DISPLAY
button to toggle between the two modes. Either
12
ENGLISH
SCENEMAKER 1216 User manual