14
ENGLISH
PAR-5-18W-IP65 User manual
SOUND Mode
This function allows sounds in the environment to control the PAR. It will then run color
change presets according to sound level. To activate this function, press MENU button
repeatedly to reach
SoUn
page. Press ENTER to adjust. The display will show current
state and flash. You can then press UP or DOWN to change between ON or OFF. Press
ENTER to confirm.
Sound Sensibility
When use Sound Mode, you can also adjust sound sensibility according to the environ-
ment sound level. Press MENU button repeatedly to reach
Sens
page. Press ENTER to
adjust. The display will show current value and flash. You can then press UP or DOWN
to change from 0 to 100. Press ENTER to confirm.
Balance
This function is useful when you need to set a fixed color basing on RGB components
only. Press MENU button repeatedly to reach
bala
page. Press ENTER. The display will
show
red
and flash. You can then press UP or DOWN to choose among
red
,
Gree
, and
blue
. Press ENTER to adjust their value. You can choose from 50 to 255. Press ENTER to
confirm; you will then come back to RED/GREEN/BLUE selection.
Repeat same step as above to adjust all three basic color values, then press MENU to
go to menu selection page.
Led Display
This function allows you to disable the LED display when inactive for more than 1
minute. Press MENU button repeatedly to reach
Led
page. Press ENTER. The display will
show current value and will flash. You can then press UP or DOWN to choose between
on
or
off
. Press ENTER to confirm.
Display Orientation
This function allows you to invert LED display orientation. It is useful in case the in
-
stallation requires you to mount the fixture upside down. To change this parameter,
press MENU button repeatedly to reach
disp
page. Press ENTER; the display will show
disp
(display positive) or
dsip
(display inverted), and will flash. You can then press UP or
DOWN to change current value.
NOTE: Please note that once pressed UP or DOWN, you will automatically go
back to main menu; and if you want to undo the display inversion, you need
to repeat the procedure described in this paragraph from the beginning.
