13
ENGLISH
PAR-5-18W-IP65 User manual
ShoU
function. Then press ENTER again to confirm.
Color Mode (
Colo
)
- The fixtures shows one among 63 preset colors. You can choose
the color, and adjust dimmer amount from 0 to 255. To activate color mode, when you
are in
ShNd
page, press ENTER and then UP or DOWN to reach
Colo
function.
Press ENTER again and the display will show the color number currently selected (from
Col1
to
Co63
). Press ENTER again; the display will flash. Now, by pressing UP or DOWN
buttons, you can change the color. Once done, press ENTER again to confirm; the dis
-
play will stop flashing.
To adjust dimmer value, when you are in
Colo
page and you see the number of selected
color, press UP or DOWN to adjust dimmer value. The display will show dXXX - where
XXX means a number between 0 and 255 (e.g.
d255
). To adjust it, press ENTER - the
display will flash - and then UP or DOWN. Once finished, press ENTER again to confirm.
Jump Mode (
JuNp
)
- The fixtures shows color jump mode. You can choose between 0
to 99 speed level, and adjust dimmer amount from 0 to 255. To activate jump mode,
when you are in
ShNd
page, press ENTER and then UP or DOWN to reach
JuNp
function.
Press ENTER again and the display will show the jump speed currently selected (from
Sp00
to
Sp99
). Press ENTER again; the display will flash. Now, by pressings UP or DOWN
buttons, you can change jump speed. Once done, press ENTER again to confirm; the
display will stop flashing.
To adjust dimmer value, when you are in
JuNp
page and you see the selected speed,
press UP or DOWN to adjust dimmer value. The display will show dXXX - where XXX
means a number between 0 and 255 (e.g.
d255
). To adjust it, press ENTER - the display
will flash - and then UP or DOWN. Once finished, press ENTER again to confirm.
Fade Mode (
Fade
)
- The fixtures shows color fade mode. You can choose between 0 to
99 speed level, and adjust dimmer amount from 0 to 255. To activate fade mode, when
you are in
ShNd
page, press ENTER and then UP or DOWN to reach
Fade
function.
Press ENTER again and the display will show the fade speed currently selected (from
Sp00
to
Sp99
). Press ENTER again; the display will flash. Now by pressing UP or DOWN
buttons, you can change fade speed. Once done, press ENTER again to confirm; the
display will stop flashing.
To adjust dimmer value, when you are in
Fade
page and you see the selected speed,
press UP or DOWN to adjust dimmer value. The display will show dXXX - where XXX
means a number between 0 and 255 (e.g.
d255
). To adjust it, press ENTER - the display
will flash - and then UP or DOWN. Once finished, press ENTER again to confirm.
