11
ENGLISH
PAR-5-18W-IP65 User manual
f
Use clamps suitable for the section of the truss on which you want to fix the fixture.
f
For overhead use, always install a safety rope that can hold at least 10 times the
weight of the fixture.
6. CONTROL PANEL & CONNECTIONS
3 6 7 4
5
8
1
2
1. DMX IN
- 3-pin IP-65 cord for connection to a DMX control device. You can use
the IP65-to-XLR adapter cable to test the unit. Also check the section “4. DMX
for details on internal wiring.
2. POWER IN
- Plug this IP-65 power cord to mains. You can use the IP65-to-EU plug
adapter cable to test the unit. Also check the section “3. MAINS CONNECTIONS”
for details about internal wiring.
3. DMX OUT
- IP-65 17mm DMX socket for sending the DMX control signal to an-
other unit.
4. POWER OUT
- IP-65 power output cord to power an additional fixture. Ensure
that the total current consumption of all connected devices does not exceed the
maximum load specified in amperes (A) related to wire section of the first unit
in the chain. Always keep in mind that each PAR-5-18W-IP65 has 100W power con
-
sumption.
