0°to +35°
UR2040 / English Manual
9
3.6 Using Sleep function
The function let user setup a timer to let device automatic power off
Press <Sleep> for 2 seconds to active sleep function, if device stay on the standby, will turn on
the device.
Press the key every time will change each 5 minutes, value of timer since 90 to OFF.
Press other key to start its corresponding function with the sleep timer is run at background
When no key has been pressed for 15 seconds, the system exit sleep timer display mode, but the
sleep timer is run at background,and the icon of bed showed on the display.
Once <Sleep> was pressed for 2 seconds, The current sleep value will be shown on display.
If want to cancel the sleep,press <Sleep> several times until it to OFF.
3.7 Electronic Volume Control
Press < > once, to increase speaker volume by one step. Hold for continually.
Press <Volume-> once, to decrease speaker volume by one step. Hold for continually.
Adjust Volume control sound output to a comfortable level , don’t make it too loud.
Technical Data
Input voltage, current:
DC5.5V,2A
Power consumption:
12W
Radio Frequency range:
FM: 87.5 ~ 108.0 MHz , 50kHz | Step
DAB Band III 174.928-239.2 MHz
Store temperature:
-
10°to +65°
Operating temperature:
Specifications are subject to change without further notice.
Copyright by Wörlein GmbH, D 90556 Cadolzburg.
