SOUNDMASTER UR2040, Manual

Page: 21 / 92

UR2040 / English Manual
7

How to use AMS
a.
Press and hold < AMS > for 2 seconds to active AMS mode.
b.
At the moment, the device will automatically scan the DAB station and store the station
that had been scanned until scan up all the frequency or stored all the memory station, it
will exit automatically.

Review AMS stored station
a.
Press < > or < > to select station.
b.
Press < Enter > to confirm select and recall the frequency.

When play DAB station,Press and hold < Info >,
a.
SCAN>>>Local scan\Auto \Manual for choosing.
b.
Menu>>>Reset\Version\ Prune for choosing. (Version means review the software
version)

Review the information of station
a)
Press < Info > to review information of station.
b)
There are Seven kinds of choices, it is respectively:
1.
Station frequency and block number
2.
Data rate
3.
Station RSSI (Station Received Signal Strength Indicator)
4.
Signal error Rate
5.
DLS (Scrolling text)
6.
Program type
7.
Station name
3.2 Listen the Radio FM
Press < >key to turn device on, press < Mode > select work mode to FM, Display should be
show as below:

How to search station
1.
When the radio is ON, press < > once to change the receiving frequency up by 1
step
2.
Press < > once to change the receiving frequency down by 1 step.
3.
Press and hold < > to search the next radio station automatically by moving the
receiving frequency up.
4.
Press and hold < > to search the next radio station automatically by moving the
receiving frequency down.

How to store station into preset location
1.
Press < MEM > once to select location of preset mode.
2.
Press < > or < > to change location.
3.
Press and hold < Enter > to store value of station into The current location.

Recall the presented station
1.
Press < MEM > once to select location of preset.
2.
Press < > or < > to change location.
3.
Press < Enter > to Confirm select and recall the frequency.

How to set up station by AMS (Automatic Memory Setup)
1.
Press and hold < AMS > for 2 seconds to active AMS mode.
2.
In this mode, the radio will automatically scan the radio station and store the station that
had been scanned until scan up all the frequency or stored all the memory station, it will
exit automatically.