RCD1755
/ English Instruction Manual
2
POWER SUPPLY
➢
Ensure that the voltage is the same as that indicated on the ac adapter identification plate.
➢
Connect the supplied AC cable to a properly installed safety power socket and the plug of the
cable into the AC socket at the back side of the unit.
BATTERY OPERATION
1. Open the lid of the battery compartment at the bottom of the unit.
2. Insert 6
batteries of type LR14 (“C” size) 1.5 V. Please ensure that the polarity is correct (see
indicated in the battery compartment).
3. Then close the battery lid.
Note:
➢
When the unit is powered by batteries, in order to play longer time, it is better not
adjust the volume to max.
➢
If the device is operated with batteries and is in standby mode, the batteries will still
be discharged. To avoid this, we recommend removing the batteries or connecting
the device to the mains.
ERP power management
The unit will turn off automatically after 10-15 minutes in standby mode if there is no
audio signal. To turn on the unit again press the
“
STANDBY
”
button.
BASIC OPERATIONS
POWER ON / OFF
Press “
STANDBY
” button to turn the unit on or off.
SELECTING MODES
During playing mode, press the “
FUNCTION
” button repeatedly to switch between the modes.
ADJUSTING VOLUME
Press
“
VOLUME UP/ DN
” to adjust the sound level.
The current volume shows on the display briefly before returning to the previous display.
FM
Pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the signal is
too strong (very close to a transmitter).
ACCESS THE RADIO FM MODE
Press
“
FUNCTION
”
button repeatedly until
“r A d”
show on display. The FM text lights on the
display when FM mode is selected.
FULL SCAN AND AUTO STORE
Press and hold for 2 seconds the
“
/ SCAN
” button, this unit will perform an automatic full
scan.
