RCD1755
/ English Instruction Manual
4
TO PROGRAM THE PLAYBACK
The program playback mode lets you program a total of 20 tracks in any desired order. You can
also program the same track to play several times within a program sequence
1. In CD mode, press
“ ” to stop any disc playback
2. While playback is stopped, press the
“PROG/+10”
button
and
“
P 01
” show on the display
“
P
” stands for program mode whereas “
01
” stands for the first program location.
3. Press
“
” or “
” to select the track for the first program location
4. Press
the
“PROG/+10”
button to store the selected track into the program location
5. Repeat steps 3 and 4 to program more tracks. Up to 20 tracks can be programmed. If
program tracks over than 20, the display will show
“
FUL
” it means memory is full.
6. Press
“
” to start playback of the programmed tracks. Playback will stop after all
programmed tracks are played.
7. To play back the programmed tracks again, press
“
/ SCAN
”.
8. To cancel the programmed sequence from the memory, press
“ ” twice in the program
mode, or open the disc compartment door.
“
PROG
”
disappears from the display
AUDIOBOOK FUNCTION (RESUME)
If you change the mode or turn off the unit and come back to the CD mode, the unit starts the
playback from the last heard point.
CLOCK
TIME SETUP
1. Switch the unit to Standby mode press and hold
“
TIME
” key in 2 seconds.
Press
“
TUNE UP +
” or “
TUNE DN
–
“ to select
12 or 24HR.
Display shows
or
hour on the display.
2. Press
“
TIME
” to confirm.
3. Press
“
TUNE UP +
” or “
TUNE DN
–
“ to set the
hour time.
4. Press
“
TIME
” to confirm
5. Press
“
TUNE UP +
” or “
TUNE DN
–
“ to set the
minute time
6. Press
“
TIME
” then the clock time is now set.
Note: When the digital clock is not set, the digital clock display shall continuously flash
to indicate that the correct time has not yet been set.
The current instruction manual can be downloaded from
Technical changes and misprints reserved.
Copyright by Woerlein GmbH, 90556 Cadolzburg,
www.soundmaster.de
Duplication only with the permission of Woerlein GmbH