Page 14
23
22
19
20
18
17
21
22 +48V & PSU MONITOR
The +48V switch with its associated LED applies phantom powering to all of the
microphone XLR sockets on the input channels.
NOTE: Phantom powered mics should not be plugged in with the +48V
switched on. Also you should be aware that some microphones draw an unusu-
ally large current which may overload the power supply, resulting in distortion.
Consult your microphone supplier for guidance if necessary.
The PSU OK LED monitors the voltage from the power supply to give failure warn-
ing, and will be illuminated under normal circumstances.
23 RECORD OUT
A pair of RCA phono jacks provide a -20dBV output of the stereo Mix and Mono out-
put for recording. The Mono output may be excluded from the Record Out signal by
repositioning internal jumpers if required.
USERMAN.QXD 13/06/97 12:27 Page 14
All manuals and user guides at all-guides.com
all-guides.com
