SoundCraft D-MIX 1000, User Manual, Page: 37 / 38

8
A dual bargraph MONITOR/CUE METER displays the level of the DJ’s
headphone feed. The upper bar displays the Left output and the lower bar displays
the Right output. The meter follows the selection of L/R or AUX as the source for
the headphones (see 13 below), and is replaced by the CUE signal when a Cue is
active, or a Split Cue when SPLIT CUE is selected (see 15 below).
DJ Booth Output
A DJ Booth output provides loudspeaker monitoring and cueing, and this is separate
from the DJ Headphones output.
9
The source for the DJ Booth output may be selected as either the L/R output or
the AUX output.
10
The level of the DJ Booth output is set by this rotary fader.
11
When AUTO CUE is pressed, the Booth output is replaced by any active Cue
signal. The original source is reinstated when the Cue is removed. The integral
LED illuminates when Auto Cue is active.
12
A mute signal is generated by any active output from a Mono input channel
which is switched to MIC and this is used to automatically mute the DJ Booth output
while that mic is ‘live’ to prevent howlround. The MUTE Led illuminates to show
when the output is muted.
DJ Headphones
A DJ Headphones output provides monitoring and cueing on headphones, and this
is separate from the DJ Booth loudspeaker output. The phones output is a 3-pole
"A" gauge jack, suitable for high impedance headphones (400 ohms), and will
appear to be low if domestic 8ohm headphones are used.
13
The source for the DJ Headphones may be selected as either the L/R output
or the AUX output. When a CUE is active, the selected source is replaced by the
Cue signal in stereo (see also SPLIT CUE below).
14
The level of the DJ Headphones is set by this rotary fader.
15
When SPLIT CUE is pressed, instead of the normal Headphones output being
replaced completely by an active Cue signal, the Cue feed appears in the right
earphone and a mono mix of the normal feed is heard in the left earphone, giving
the DJ continuous monitoring of the mixer output if required. The integral LED
illuminates when Split Cue is active. The Monitor/Cue meter follows the
headphone signal.
16
The headphones output is a standard 1/4" 3-pole jack.
Additional Outputs
The pre-fade Stereo Mix output is also fed to an unbalanced RECORD OUTPUT
on RCA phono connectors, and a ground compensated mono SUB-BASS output
via a 20Hz -80Hz filter.
A separate mono S/LIGHT OUTPUT is provided to drive sound to light
controllers.
Master Module 4.13