Several functions on the D-Mix1000 may be altered by internal adjustment of
jumpers on the PCBs.
Mic/Line Input Module Jumper Options (SC3451)
J1A
Fit to d48V phantom power to the Mic input XLR. (Default)
J1B
Fit to 48V phantom power to the Mic input XLR.
J2A
Fit in position A to enable Voice-Over. (Default)
J2B
Fit in position B to disable the Voice-Over.
J3
Fit in position A for Aux source pre-fade. (Default)
Fit in position B for Aux source post-fade.
The black rectangles on the diagrams below show jumper positions.
J umpers
Stereo Input Module Jumper Options (SC3452)
J1,2A
Fit to enable RIAA equalisation on Line 1. (Default)
J1,2B
Fit to enable -10dBV (Non-RIAA) input level on Line 1.
J3,4
Fit in position A for Aux source pre-fade. (Default)
Fit in position B for Aux source post-fade.
2.14
Installation
Summary of Contents for D-MIX 1000
