PM-88 Front Panel
Front Panel
4
1. REMOTE MIC STATION LEVEL CONTROL
This determines the level of the signal originating from the remote microphone station for
each channel.
2. PAGING MIC LEVEL CONTROL
This adjusts the signal level originating from the paging microphone for each channel.
3. WALL MOUNT CONTROLLER (WP-8A) ENABLE BUTTON
This is a toggle switch to select whether the WALL Controller (WP-8A) connected to each
output zone is enable/disable. If the button turns on, BGM source and volume are controlled
by WP-8A.
4. BGM INPUT DISPLAY
Displays selected BGM source.
5. BGM INPUT SELECTION BUTTON
8 BGM sources can be selected by these button.
6. BGM OUTPUT LEVEL CONTROL
BGM output level can be adjusted by these potentiometer.
The output level of a Paging MIC and a remote MIC volume are not adjusted by this
potentiometer.
7. BGM OUTPUT LEVEL LED
8. MONITOR SPEAKER LEVEL CONTROL
This potentiometer allow to adjust Monitor Speaker output level.
9. MONITOR SPEAKER
Built-in 5-Watt Power Amplifier and 4
Ω
Monitor Speaker to monitor selected one of 8 BGM
sources.
