Operations
13
7.Independent Local BGM and MIC Broadcasting using WP-8A
Independent local broadcasting is possible if using WP-8A. You can perform the desired
MIC broadcasting or listen to BGM music in respective area other than the Main BGM
connected to PM-88.
- Connect the desired MIC or sound source unit to MIC or LINE input.
- Adjust volume by using the respective volume to adjust input sound.
- Immediate broadcasting is allowed and the local output volume is adjusted by using
the volume control on the WP-8A or the volume control on the PM-88.
8. EM32 Connection
- Connect to the EM32 on the rear side of PM-88 using a CAT5 (UTP) cable. Same as
connection method of WP-8A.
- Immediate broadcasting is allowed without separate ID setting.
- 4 sets of EM32 can be connected.
- Flashing buttons mean defect of the unit or connection status, thus check connection
status and the unit.
9.EM32 MIC Broadcasting
Connect a MIC to the MIC input jack. Both dynamic MIC and condenser MIC can be used.
- The button turns on when when broadcast area is selected. All regions of
the PM-88, selected when the ALL CALL button is pressed on the EM-32.
- R is displayed on the BGM 7-segment displays of PM-88 for the broadcasting area.
- Press the CHIME button, EM32 begins to broadcasting the preset CHIME signal.
- Press and hold the TALK button to start broadcast.
- Releasing the button to end broadcast.
10. EM32 Priority Broadcast
- Broadcasting of any EM32 is allowed in the non-broadcasting area.
- If the relevant area button turns on and BUSY LED is illuminated , other EM32 is already
broadcast in the same area.
