Soundavo NSA-250, Owner'S Manual

Page: 5 / 18

1. AUX INPUT: For connecting to audio device
equipped with analog output, such as CD
player.
3. OPTICAL INPUT: For connecting to audio
device equipped with digital output, such as
TV or digital preamplifier.
802.11ac radio can be used in any installation
where running a network cable is difficult or
impractical.
8
9 1 2 3 4 5 6
7
5. SPEAKER OUT: For connecting to speakers.
9. AC IN
4. ETHERNET:
The Ethernet connection of the
NSA-250 is used for the “Soundavo Player”
music streaming APP for playing any music
stored on connected network drives using
UPnP. The default network setting is
DHCP-enabled, but the NSA-250 can be
configured with a static IP address using the
Advanced_IP_Scanner software. The
ethernet connection is the preferred method
of network connection, but the NSA-250 is
fully Wi-Fi certified and its advanced 2.4Ghz
!" #$%&$ '()*(('
!" #$ %&$'&&%
(&)*+,
For properly wireless connection,
please ensure the antenna is fixed well.
!" #$%&$ '()(*+
For the first time connecting the
Wi-Fi streaming to the local Wi-Fi network,
or change the position of
NSA
-250 to a new
Wi-Fi network, please press this RESET
button 5 seconds to configure the
NSA-
50
wireless network settings.
REAR PANEL
5
2. SUB OUTPUT:
For connecting to Sub amplifier
or active/powered Subwoofer speaker
Note
: Please do not connect the power cable
to the AC wall outlet before connecting the
speakers properly. The speaker has polarity
(+/-), please connecting the speaker correctly.