www.soundskulptor.com
Document revision 1.1 – Last modification : 21/04/08
PSL1 Assembly guide
36. Setup
Follow the instructions of the PSL1 Setup Guide.
37. Closing the case
With the help of the bottom cover, position the fixing nuts in front of the holes.
Place the mylar insulating sheet on the bottom of the PCB.
Place the bottom cover and secure it with 4 black screws.
Place the top cover and secure it with 4 black screws.
Stick the four self adhesive rubber feet on the bottom of the case.
38. Congratulations, you're done !
Copyright ©2008 SoundSkulptor
