www.soundskulptor.com
Document revision 1.1 – Last modification : 27/05/21
EQ573 Assembly guide – Link cable assembly (for connecting to MP573)
40. Connectors soldering
If you own a crimping tool, crimp a contact on each wire.
If not, tin the wire tips and solder a contact to each wire.
41. Plug insertion
Insert 2cm of heat-shrink tube on the wire.
Insert the plug on the 3 contacts, taking care to respect the colour positions.
42. Second connector
Repeat the same operations identically at the other end of the cable.
43. Tube shinking
If you own a hot-air gun, quickly blow some hot air on the two tubes to make them shrink.
Copyright ©2020 to today SoundSkulptor