background image

 

 

1

2 Year Limited Warranty 

Sound Sculpture Musical Instrument Products (Sound Sculpture) warrants the PowerSwap to the original purchaser to be free of defects in 
material and workmanship under normal use for a period of 2 year from the date of purchase from an authorized Sound Sculpture dealer or 
directly from Sound Sculpture Musical Instrument Products. 
 
Sound Sculpture's liability under this warranty is limited to repairing or replacing defective materials that show evidence of defect, and only if 
the product is returned for repair directly to Sound Sculpture or to the authorized Sound Sculpture dealer from which the unit was purchased. 
   
Sound Sculpture reserves the right to make changes in design or make additions or improvements on the product without incurring any 
obligation to install the same on products previously manufactured. 
  
Sound Sculpture shall not be liable for any consequential damage or loss of profits as a result of the use of this product even if Sound Sculpture 
is advised of the possibility of such damages or loss.  In no event will Sound Sculpture's liability exceed the price paid for the product.  
 
No other warranties are expressed or implied and Sound Sculpture neither assumes nor authorizes any person to assume for it any obligation or 
liability in connection with the sale of this product.  In no event shall Sound Sculpture or its dealers be liable for special or consequential 
damages due to the use of this product.  Some states do not allow the exclusion or limitation of incidental or consequential damages, so the 
above exclusions or limitations may not apply to you. 

 

In Case of Difficulty 

In the unlikely event that you experience problems with the PowerSwap, please refer to the section in this manual pertaining to the operation 
you are having difficulty with. Very often the difficulty is simply a result of improper setup or programming and can be resolved by studying this 
manual. 
  
If, after reading this manual, you are unable to resolve the problem email us at [email protected] or call Sound Sculpture at (303) 442-
1954 during normal business hours.  If we are unable to resolve your problem over the phone and determine that the unit needs repair, you will 
be given a return authorization number and further procedures for returning the unit.   UNAUTHORIZED REPAIR OF THE PowerSwap BY ANYONE 
OTHER THAN THE FACTORY VOIDS THE WARRANTY.  NO UNITS WILL BE ACCEPTED FOR REPAIR WITHOUT FIRST CONTACTING THE FACTORY FOR 
A RETURN AUTHORIZATION NUMBER.  

 
 

Summary of Contents for PowerSwap









Reviews: