16
Playing the Jukebox
Making Selections
• When the discs and labels are installed, selections can be made using the
keyboard at the front of the Jukebox or via the remote control.
• To “flip” the title rack pages press the red buttons located on the far right
hand side of the button bank. (FIG3) or by using ‘F3’ or ‘F4’ on the remote
control. (FIG5)
• When making selections the Jukebox will require a disc number (which is
the 3 digit number specified on the title card) and a 2 digit track number
(either 00 to play the entire disc - or the track number as specified on the
title card)
• If you make a mistake while entering a selection press ‘C’ on either the
remote or Jukebox button bank to re-start the selection process.
Playing a single track
• To play a track, select the 3 digit number for the disc, and then the 2 digit
number of the individual track. These numbers will show up on the display
as they are entered.
• This process can then be repeated to build up the “playlist” on the Jukebox.
Playing an entire CD album
• To play an entire CD disc, select the 3 digit disc number then enter the 2
digit track number as ‘00’.
• When playing the whole of an album, the ‘SKIP’ buttons |<< / >>| can be
used to select the next or previous track on that disc.
• When playing individual tracks from multiple albums the buttons can be
used to reject the track or skip back to the beginning of the track playing.
• Multiple discs or tracks can be selected to build a “playlist” on the Jukebox.
• Playlists can be cleared by pressing the “F1” button on the remote control.
Ejecting a track or disc
• To eject an entire disc press ‘REJECT DISC’ on the remote.
• To reject a single track press ‘REJECT TRACK’ on the remote.
Display
• When the Jukebox is playing, the display will switch off. Pressing the “C”
button will show which disc/track is currently playing.