Sound Devices 970 Page 50 User Manual And Technical Information Download

Page: 50 / 72

970 User Guide and Technical Information

v. 2.02

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Stor

e & F

ile Manag

ement

Editing Metadata

Metadata can be edited from the 970 before, during, or after recording. Metadata edits to a take will

ripple to that same take on all drives. Metadata can be edited from the Take Details screen or from

the Quick Metadata Screen.

Editing Metadata from Take Details

1. Press FILES to access the File List.
2. Rotate the Control Knob to highlight a recorded take, the currently recording take (indicated

with red text), or the next take (always at the top of the list with a date label of “Next Take”):

Next Take

Current (recording)Take

Previous (recorded) Takes

3. Press the Control Knob to access the Take Details screen. (For multi-file entries, hold the

Control Knob)

4. Rotate the Control Knob to select the desired field for editing.
5. Press the Control Knob and use the on-screen keyboard or attached USB keyboard to enter

text.

6. When finished, Select OK on the on-screen keyboard or press Enter on an attached USB key-

board. Changes made to the currently recording take and to previously recorded takes will

be written immediately.

The special list item “Next Take”, represents the file name and metadata for the take that will be

written the next time record is engaged. This entry does not represent a file on the drive. Only

the Scene and Take fields of the next take can be edited. Values entered into Scene and Take fields

of the next take will also be entered into Setup Menu options

[File Storage - Scene/Shot]

and

[File Storage - Take]

respectively.

Editing Metadata from Quick Metadata Screen

(

See “Quick Metadata Screen”, page 10

)

Editing Track Names

Audio Track Names are stored in the metadata of the Broadcast Wave File. Audio Track Names are

set in the Main View in the Name column. To edit the name of an audio track:

Summary of Contents for 970









































































Search results

Summary of Contents for 970

Reviews:

Related manuals for 970

Brands by name

Popular brands

Sound Devices 970, User Manual And Technical Information

Search results

Summary of Contents for 970

Reviews:

Related manuals for 970

Brands by name

Popular brands