Sound Devices 970, User Manual And Technical Information

Page: 40 / 72

970 User Guide and Technical Information
v. 2.02 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
34
Ext
er
nal Contr
ol
1 2 3 4
7
6
5
1)
Track Name
Click to edit.
2)
Track Source
Hover cursor (or touch) to access menu of
available audio input sources.
3)
Gain Controls
Slider and drop-down menu controls
input gain level.
4)
Input Delay
Set delay of input signal in milliseconds.
5)
Armed Track (On)
Track is armed with an active input
source and will be written during record-
ing. Click to unarm.
6)
Unarmed Track
Track is not armed. Click to arm.
7)
Armed Track (Off)
Track is armed with input source set to
Off
and will be not be recorded. Click to
unarm.
Audio Output Routing
When the Outputs tab is selected, track-to-output controls appear. From this view route any track to
any output.
TC Menu
Timecode/Sync
Menu settings are displayed and can be edited directly from the web browser.
Remote Menu
The Remote Menu provides quick access via the web browser to the 970
Remote Control
menu op-
tions. Menu settings are displayed and can be edited directly from the web browser.
Network Menu
The Network Menu provides quick access via the web browser to the 970
Network
menu options.
Menu settings are displayed and can be edited directly from the web browser.
System Menu
The System Menu provides quick access via the web browser to the 970
System
menu options. Menu
settings are displayed and can be edited directly from the web browser.
Triggering Recording from External Timecode
The 970 can be configured to start recordings when incoming timecode begins rolling and stop when
it becomes stationary. This is generally referred to as “Record Run” timecode. The master timecode
device should be setup in this manner. To configure the 970 to follow Record Run commands: