Sound Devices 664 User Manual Download Page 117

Page: 117 / 183

117

Topics in this section include:

Starting Wingman

Wingman is an iOS-based application

that provides wireless remote control

and monitoring of any 6-Series field

production mixer/recorder—the 688,

664, or 633.
It may be downloaded from Apple’s App

Store and installed on any iPad, iPhone,

or iPod Touch mobile device, running

iOS 8.0 or later.
The WM-Connect hardware accessory,

a Bluetooth

Smart USB dongle for the

6-Series, is required for this integration.

Instructions for installing WM-Connect

and downloading the Wingman app

are provided in the

WM-Connect

Quick

Start Guide

, shipped with the hardware

and offered as a free PDF download

from the Sound Devices website.

Before starting the application, ensure the WM-Connect hardware

accessory (shown at right) is attached to your 6-Series mixer, that

Bluetooth is turned on (on your mobile device), and the mixer is both

powered on and running firmware version 4.00 or later.

To start the Wingman App:

Tap the Wingman icon.

User Interface

The Wingman software application provides an easy-to-navigate, touchscreen

user interface. However, because of variable screen sizes, views and some

procedures differ depending on which mobile device is in use.
This section describes the application’s user interface and depicts images of the

application as it appears on an iPad.

For information pertaining to how the views and workflow differ on the smaller

screens of an iPhone or iPod Touch, see

Track View on iPhone or iPod Touch

The main screen is divided into three parts: the status bar, the viewing area,

and the tab bar.

Starting Wingman

User Interface

Transport View

Connecting to a 6-Series Mixer

Using Transport Controls

Designating Circle and False Takes

Using Meter Views

Editing Track Names

Arming/Disarming Tracks

Take List View

Editing a Take’s Metadata

Reports View

Creating Sound Reports

About View

Track View on iPhone or iPod Touch

Wingman Wireless Interface

Summary of Contents for 664
























































































































































































Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands

Sound Devices 664, User Manual

Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands