Sound Devices 664 User Manual Download

Page: 130 / 183

User Guide

130

Creating Sound Reports

Sound reports created from Wingman are stored on the mixer and may be

emailed from your iOS device.

To create a sound report:

1. Tap the Reports icon.

2. Tap the Create Report button at the top of the screen.

◦ If the Email option is turned on, the sound report (csv) file will appear as

an attachment to an email that opens on screen.

◦ If the Email option is turned off, a message appears indicating the

successful creation of the sound report, which is stored in the current

directory on the target media (CF or SD) inserted into the mixer.

Report creation is not allowed during recording.

About View

The About view displays important information and links related to the

Wingman application and the 6-Series mixer to which it is connected.
Information available in the About view includes:

•

Wingman application version number

•

Build number

•

WM-Connect version number

•

6-Series model number

•

6-Series firmware version number

Also included are interactive links to the following online resources:

•

The WM-Connect Quick Start Guide

•

The Wingman User Guide

•

The connected 6-Series mixer’s User Guide

•

Link to file a Support Query with Sound Devices Technical Support

Summary of Contents for 664
























































































































































































Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands

Sound Devices 664, User Manual

Search results

Summary of Contents for 664

Reviews:

Related manuals for 664

Brands by name

Popular brands