background image

© 1996-2021 SOTA Instruments Inc. 

Page 12 of 14

|

 www.sota.com

The Silver Pulser Model ZBB1 Manual

it is dark grey as this indicates a higher level of impurities or larger particle sizes.
Clarity: The silver electrolyte should be clear. Do not drink if it is cloudy.
Storage: Pour the Ionic~Colloidal Silver into a dark glass bottle—never metal—and 

store in a dark, dry place. Over time, light will degrade Ionic~Colloidal Silver by 

turning the electrolyte grey or black. Discard if this occurs. 
When made and stored properly, Ionic~Colloidal Silver retains freshness for many 

weeks. It is suggested, however, that you use as soon as possible. If settling occurs, it 

is losing potency. Do not drink any sediment.
Do not freeze, refrigerate, or expose Ionic~Colloidal Silver to extremes of 

temperatures as its potency may be affected. 
Save on Batteries: When making Ionic~Colloidal Silver the unit can be powered by 

an AC-DC wall adaptor. See ‘Optional Power Input’ on page 12.
Switch Silver Wire Positions - Silver Wire Holder Option: The silver ions only 

come off the wire in the positive (+) or anode terminal into the water. To equalize the 

wearing of the Silver Wires, periodically exchange the position of the wires. If left in 

the same position, only one Silver Wire will gradually wear away. 
Replacing the Silver Wires: The Silver Wires are of the highest grade .9999 or 99.99% 

or 4 Nine pure fine silver. When the SOTA pure Silver Wires wear too thin, do not 

replace with sterling silver, as it contains nickel, which can be toxic. 

TYPICAL USE

Quantity: There is no definite amount to drink. When consumed on a regular basis—

daily or several times a week—it is best to drink no more than 1 to 2 ounces  (30 to 60 

ml) at a time. 
Larger amounts of Ionic~Colloidal Silver—1 cup or more—can be consumed for 

short periods of time, for example, a few weeks. It is better to take smaller amounts 

throughout the day rather than all at once.
Length of Use: The SOTA Products User Guide available at  

www.sota.com/spug offers suggestions for Focused, Basic and Ongoing Wellness 

Plans. 
General Guideline: 1 to 2 ounces (30 to 60 ml) or more daily for 2 or 3 months. 

Ionic~Colloidal Silver can be used as needed. The initial program can be repeated at 

Summary of Contents for ZBB1















Reviews: