© 1996-2021 SOTA Instruments Inc.
Page 7 of 14
|
www.sota.com
The Silver Pulser Model ZBB1 Manual
9. Position one of the covered probes over the pulse point on the thumb side of the
wrist, under the Wrist Strap as in image 1.
10. Place the other covered probe in line with the pulse point on the little finger side of
the wrist. This pulse point is usually harder to feel. It is located in the soft hollow
on the wrist, in line with the little finger.
COTTON SLEEVES WITH VELCRO
®
OPTION
6. Put the Wrist Strap on with the Velcro
®
side of the Wrist Strap face-out rather than
towards the skin.
Prepare one pair of Cotton Sleeves. Each Cotton Sleeve
is sewn on three sides; to find the open end of the Cotton
Sleeve, squeeze the long sides of the sleeve and the
unsewn end will pop open.
7.
Attach one Cotton Sleeve to the Wrist Strap in line
with the pulse point on the thumb side of the wrist. The
open end of the Cotton Sleeve will point down toward
the elbow. Press the sleeve to the Wrist Strap to firmly
adhere the sleeve in place.
Place the other Cotton Sleeve, again with the open side
towards the elbow, in line with the pulse point on the
little finger side of the wrist. This pulse point is usually
harder to feel. It is located in the soft hollow on the wrist,
in line with the little finger. Press the sleeve to the Wrist
Strap to firmly adhere the sleeve in place. See image 2.
Once in place, the Velcro
®
will hold the Cotton Sleeves in the right position for
repeated use.
8. Take the Wrist Strap off.
9. Insert one probe from the Micropulsing Cord into each of the Cotton Sleeves. Use a
gentle twisting motion to work the Probes into the Cotton Sleeves.
10. Wet the Cotton Sleeves with water.
11. Put the Wrist Strap on so the damp Cotton Sleeves are against the skin over the
pulse points. See image 1 above.
2
