Sota SP Lite SPL1 Manual Download Page 9

© 2003-2022 SOTA Instruments Inc. 

Page 9 of 11

|

 www.sota.com

The SP Lite Model SPL1 Manual

Notes:

Color

: ionic~colloidal Silver remains colorless to about 5 or 6 ppm. At a slightly 

higher ppm it will be a pale gold color. do not drink if it is darker than pale gold or if 

it is dark grey as this indicates a higher level of impurities or larger particle sizes.

Clarity: 

the silver electrolyte should be clear. do not drink if it is cloudy.

To Make Larger Quantities: 

 the Sp lite can be used to make larger quantities of 

ionic~colloidal Silver. for a concentration between 5 to 8 ppm, use the following 

times as a guide:

for 4 cups or 1 liter: 3 to 4 hours.
for 1 gallon (16 cups) or 4 liters: 10 to 12 hours.

Storage:

 pour the ionic~colloidal Silver into a dark glass bottle—never metal—and 

store in a dark, dry place. over time, light will degrade ionic~colloidal Silver by 

turning the electrolyte grey or black. discard if this occurs. 
When made and stored properly, ionic~colloidal Silver retains freshness for many 

months. it is suggested, however, that you use as soon as possible. if settling occurs, 

it is losing potency. do not drink any sediment.

Do not freeze, refrigerate, or expose Ionic~Colloidal Silver to extremes of 

temperatures as its potency may be affected. 

Save on Batteries

: When making ionic~colloidal Silver the unit can be powered by 

an Ac-dc wall adaptor. See ‘optional power input’ on page 10.

Switch Silver Wire Positions

: the silver ions only come off the wire in the red clip, 

positive (+) or anode terminal into the water. To equalize the wearing of the Silver 

Wires, periodically exchange the position of the wires. if left in the same position, 

only one Silver Wire will gradually wear away.  

Replacing the Silver Wires

: the Silver Wires are of the highest grade .9999 or 99.99% 

or 4 Nine pure fine silver. When the SOTA pure Silver Wires wear too thin, do not 

replace with sterling silver, as it contains nickel, which can be toxic. 

tyPiCAl Use

Quantity:

 There is no definite amount to drink. When consumed on a regular basis—

daily or several times a week—it is best to drink no more than 1 to 2 ounces   

(30 to 60 ml) at a time. 
larger amounts of ionic~colloidal Silver—1 cup or more—can be consumed for 

Summary of Contents for SP Lite SPL1












Reviews: