© 2012-2021 SOTA Instruments Inc.
Page 8 of 14
|
www.sota.com
The Silver Pulser Model SP6 Manual
pulse points. See image 7 on page 8.
11. Turn the unit ON by rotating the ON/OFF switch
clockwise. Turn the switch slowly until you feel the
current. If you do not feel the current, see ‘Notes’ on page
8.
a. The
green
light indicates the unit is ON. If the light does
not come on, the battery may not be placed correctly.
b. The flashing
yellow
light should come on and get
brighter as the intensity is turned up. If the flashing
yellow
light does not come on, the electrical path has not
been established. See ‘Troubleshooting’ on page 14.
16. When finished, turn the unit OFF by rotating the ON/OFF
switch counter clockwise until it clicks. Do not force the ON/OFF switch past its
natural stopping point.
17. Unplug the Micropulsing Cord. Do not
store the unit with the Micropulsing Cord
plugged in as this can damage the Cord.
18. The Cotton Sleeves will remain correctly
positioned for the next session.
19. Clean the wrist and apply a healing
lotion to avoid irritation.
Notes:
Suggestions for Feeling the Current:
If the
current is not felt with wet Cotton Sleeves,
prepare a mild salt solution to wet the sleeves.
Add a few grains of salt to the water in the 50
ml dropper bottle.
Drink enough water to keep the body well
hydrated. Hydration can affect the ability to
feel the current.
Care of Micropulsing Cord and Rubber Probes:
Remove the Rubber Probes
occasionally to clean in a mild soap solution. Rinse thoroughly. If necessary, gently
wipe the metal pins of the Micropulsing Cord.
7
8