© 2012-2021 SOTA Instruments Inc.
Page 4 of 14
|
www.sota.com
The Silver Pulser Model SP6 Manual
• One (1) Product Manual
FOR MICROPULSING APPLICATION:
• One (1) Micropulsing Cord for Rubber Probes
• Two (2) Pair Conductive Rubber Probes
• Six (6) Pair Cotton Sleeves with Velcro
®
• One (1) Arm Band with Clip
• One (1) Neoprene
®
Velcro
®
Wrist Strap
• One (1) Dark Glass Dropper Bottle
FOR MAKING IONIC~COLLOIDAL SILVER:
• One (1) Silver Wire Holder
• Two (2) Silver Wires of .9999 (4 Nine) Purity
• One (1) Green Scrub Pad
DO NOT USE
1. Do not use in the following situations as safety has not been explored using the
Micropulsing function:
a. In the case of pregnancy.
b. With an active implanted device such as a pacemaker, etc.
2. As with all electrical products do not use near water, when driving a car or when
operating heavy equipment.
3. Do not connect the Micropulsing Cord or the Silver Wire Holder to any other USB
outlet, such as a computer or power supply. Do not plug any other USB connections
into the Silver Pulser, other than the Micropulsing Cord and the Silver Wire Holder.
MICROPULSING CAUTIONS
1. Do not place the Conductive Rubber Probes over skin lesions, abrasions, new scars,
cuts, eruptions or sunburn.
2. Discontinue use if the Micropulsing suddenly feels different or prickly
and
the
YELLOW light stops flashing. Turn the unit OFF and contact SOTA.
3. Caution is advised if using potentially harmful substances such as recreational and
prescription drugs, as it is not known if microcurrents will interact or if individual
reactions may occur.