22 von 36
service record Airon
2021-06-10
3.6
Anti-tipper assembly
3.6.1 Length adjustment
• (1)
Remove the screw
(1A)
,
• pull the stand tube into the desired
position
(1C)
• Insert the screw
(1A)
into a desired hole
(1B)
and tighten it
(A)
(B)
(C)
(1)
The anti-tipper are set at the factory. If the
setting is to be changed, this can be done by
moving the stand tube:
The tilt protection can also be changed by mo-
ving the snap catch
(2A)
. To do this, remove
the cone lock
(2B)
and move it into the hole
(2C)
.
If the cone lock
(2B)
is moved, the stop
(3A)
must also be moved into the corresponding
hole
(3B)
.
(2)
(A)
(B)
(C)
(3)
(A)
(B)
