service record Airon
11 von 36
2021-06-10
3.1
Wheels assembly
You influence through the camber:
• the lateral tipping stability,
• the shoulder drive wheel position and
• the track width of the wheelchair.
3.1.6 Camber
(2)
(A)
To change the camber you have to order a
suitable camber adapter.
The following camber adapters can be selec-
ted:
• 1°
• 3°
• 5°
• 7°
To replace, loosen screw
(2A)
and remove
screw
(2B).
Replace the old camber adapter
with the new camber adapter.
(B)
(1)
Please ensure that there is sufficient distance
to the side panel so that the drive wheel does
not touch the side panel when it is loaded
from the side.
After every change to the camber adap-
ter, it must be checked that the distance left
and right to the clamping flange is the same.
If you want to change the distance to the
frame, first loosen on one side
(2A)
and
(2B)
and move the adapter to the desired position.
Tighten the screw connections
(2A)
and
(2B)
again. Now proceed in the same way with the
other side.
Be sure to check the functionality of the knee lever brake as well as the wheel toe-in and
the caster head angle of the caster wheels and readjust them if necessary.
(B)
