40
Settings
6.20 TecoS3
Starttemperature at sensor 3 in Energy saving mode
TecoS3 is the minimum temperature of S3 for the thermostat function in Energy sav-
ing mode. If the temperature drops below this value and the thermostat period (see
thermostat periods) allows it, relay R2 is switched on till the temperature reaches
6hysteresis (see hysteresis)
Settings range: 0°C to 99°C / Default: 20°C
6.18 „Party Function“
With the party function the storage temperature is heated up once to the reference
temperature (TsetS3, respectively hysteresis in energy saving mode). The
party mode is enabled by pressing the „esc“-key for 3 seconds in the main menu.
Party function is not activated by menu. The ESC key has to be pressed for 3
seconds.
During Energy saving mode, Party function heats up to hysteresis
instead of hysteresis.
Caution
Caution
6.19 Energy saving mode
Energy saving mode for the thermostat function
In energy saving mode the additional heating is switched on if the temperature drops
below TecoS3 and heats up to Teco+hysteresis. When energy saving mode is active,
but no solar heat is available, TsetS3 is used like in normal mode.
Settings range: On, Off/ Default: Off
