Soozier A90-220V80, Assembly Instruction Manual

Page: 11 / 12

Description of Error Message
E01 Indicates that the electronic panel and the electronic control directions
notebook are abnormal.
E02 Indicates that an abnormality between the controller and the motor has
been detected.
E03 Indicates that the control detection rate is abnormal.
E04 Indicates that the control detects the protection information message
against the over-voltage of the motor.
E05 Indicates that the control detects the request of protection information
against the over-current of the motor.
E06 Indicates that the control detects the abnormally low voltage of the
power supply of conduction.
E07 The security key the the clock is not inserted in it place.
Solutions for Common Problems
Problem Solution
The treadmill can’t be turned on. Check if the cable of the motor is
connected correctly. Use the remote
control to turn on the treadmill.
The communication line of the
electronic clock doesn’t work or the
contact is deficient.
Please disconnect and reconnect the
communication line.
The treadmill load exceeds the rated
operating voltage of the motor.
Use a voltage which is within the rated
operating voltage range of the motor.
The voltage is too low. Check if the power supply cable is
normal.
The security key falls off. Place the security key in the
designated position on the electronic
clock.