Sony ZV-1 Service Manual Download Page 81

Page: 81 / 104

18. Turn the Lubricating Block Assy (B)* counterclockwise to the maximum extent, and detach the Lubricating Block Assy (B).

*) Use a Lubricating Block Assy (B) that was not installed in the unit.

19. Remove the 1st/2nd/3rd group assy from the Stationary Tube. And remove the two screws to detach the DC Motor Worm Assy.

20. Turn the Straight Tube Block Assy counterclockwise and remove it from the 1st/2nd/3rd group assy.

21. Remove the 1 Group Frame Block Assy from the 2nd/3rd group assy.

Lubricating Block Assy (B)

Stationary Tube

DC Motor Worm Assy

1st/2nd/3rd group assy

Straight Tube Block Assy

Straight Tube
Block Assy

1st/2nd/3rd group assy

1 Group Frame Block Assy

2nd/3rd group assy

Sony CONFIDENTIAL

For Authorized Servicer

SYS SET

2020/05/28 23:46:49 (GMT+09:00)

Summary of Contents for ZV-1








































































































Search results

Summary of Contents for ZV-1

Reviews:

Related manuals for ZV-1

Brands by name

Popular brands

Sony ZV-1, Service Manual

Search results

Summary of Contents for ZV-1

Reviews:

Related manuals for ZV-1

Brands by name

Popular brands