The battery will start to discharge a little after it is fully charged and then charges
again after a certain time when the charger is connected. This is to extend battery life
and may result in the charge status showing a level below 100 percent.
Read more about the battery and how to improve the performance in
Battery and power
management
. on page 122.
To charge your device
1
Plug the charger into a power outlet.
2
Plug one end of the USB cable into the charger (or into the USB port of a
computer).
3
Plug the other end of the cable into the micro USB port on your device, with
the USB symbol facing up. The notification light is lit when charging starts.
4
When the device is fully charged, disconnect the cable from your device by
pulling it straight outwards. Make sure not to bend the connector.
If the battery is completely discharged, it may take a few minutes before the notification light
is lit and
appears.
Battery notification light status
Green
The battery is fully charged
Flashing red
The battery level is low
Orange
The battery is charging. The battery level is between low and full
11
This is an Internet version of this publication. © Print only for private use.