Sony XDCAM XDBK-J102, Installation Manual

Page: 11 / 28

1-3 (E)
XDJ-1000
1-3. Operating Conditions
c
Good air circulation is essential to prevent internal heat build-up. Place the unit in location with suf fi cient
air circulation.
Do not block the ventilation holes of the cabinet and the front and rear panels.
Operating temperature: 5
d
C to 40
d
C
Operating humidity: 20 % to 90 % (non-condensing)
Storage temperature:
_
20
d
C to 60
d
C
Locations to avoid:
.
Areas where the unit will be exposed to direct sunlight or any other strong lights.
.
Areas near heat sources.
.
Dusty areas or areas subject to vibration.
.
Areas with strong magnetic fi eld.
.
Areas with much electrical noise.
.
Areas with much static electricity.
.
Areas that is impossible to fi nd a speci fi ed room for installation.
(Refer to “1-5. Installation Space”.)
.
Areas airtight.
Tilt allowance: Use this unit as horizontally as possible. (Within 2
d
)
1-4. Power Supply
1-4-1. Voltage and Power Requirements
This unit’s power line has a switching regulator.
c
Be sure to operate the unit within the range of following power voltage.
Power voltage: AC 100 to 240 V
Power frequency: 50 Hz or 60 Hz
Power consumption: Maximum 170 W
1-4-2. Recommended Power Cord
To get a power cord, please contact your local Sony Sales Of fi ce/Service Center.
w
.
Use the approved Power Cord (3-core mains lead)/Appliance Connector/Plug with earthing-contacts
that conforms to the safety regulations of each country if applicable.
.
Use the Power Cord (3-core mains lead)/Appliance Connector/Plug conforming to the proper ratings
(Voltage, Ampere).
.
Never use an injured power cord.