Chapt
er
5
S
c
ene
Se
lec
tion
47
5-2 Creating Clip Lists
To search
Use the jog and shuttle dials.
2
At the point you want to set as the In point, hold down
the
G
/IN button and press the SET button.
An In point is set, and the IN indicator lights.
3
In the same way, search for the point you want to set
as the Out point, and then hold down the
g
/OUT
button and press the SET button.
An Out point is set, and the OUT indicator lights.
To check the duration
Press the
G
/IN button and the
g
/OUT button at the
same time.
The duration appears on the screen.
To reset an In point or Out point
With the
G
/IN button or
g
/OUT button held down,
press the RESET button.
4
With the SHIFT button held down, press the SET
button.
The section between the In point and Out point is
added to the end of the current clip list as a sub clip.
When you set In and Out points stretching across
several clips
One sub clip is created for each of the clips.
5
Repeat steps
1
to
4
until you have added all of the clips
you want to the current clip list.
6
Save the current clip list to disc.
See 5-2-6 “Saving the Current Clip List to Disc” (page
50).
5-2-2 Reordering Sub Clips
1
Press the SUBCLIP button, turning it on.
2
Press the THUMBNAIL button, turning it on.
Thumbnails of the sub clips in the current clip list
appear.
Clip 1
Sub clip 1
Clips recorded on the disc
Clip 2
Clip 3
Sub clip 2
Sub clip 3
In point
Out point
ACCESS
L
R
NETWORK
LOCAL
REMOTE
AUDIO MONITOR
L
R
CH-1
CH-2
CH-3
CH-4
CH-5
CH-6
CH-7
CH-8
SHUTTLE
JOG
THUMBNAIL
ESSENCE
MARK
MARK1
MARK2
IN
OUT
MENU
S.SEL
SET
RESET
SHIFT
TOP
F REV
F FWD
END
PREV
NEXT
PLAY
STOP
CLIP
MENU
SYSTEM
MENU
SUBCLIP
SUBCLIP button
THUMBNAIL button
SET button
RESET button
SHIFT button
PREV button
NEXT button
G
/IN button
Arrow buttons
g
/OUT button
Jog dial
