Sony WI-XB400 Help Manual Download

Page: 14 / 104

Wireless Stereo Headset

WI-XB400

Charging the headset

The headset contains a built-in lithium-ion rechargeable battery. Use the supplied USB Type-C cable to charge the
headset before use.

System requirements for battery charge using USB

Open the USB Type-C port cover.

Connect the headset to an AC outlet.

Use the supplied USB Type-C cable and a commercially available USB AC adaptor.

The indicator (red) of the headset lights up.
Charging is completed in about 3 hours (*) and the indicator (red) turns off automatically.

After charging is complete, disconnect the USB Type-C cable and close the USB Type-C port cover securely to
prevent water or dust from entering the headset.

Time required for charging the empty battery to its full capacity. The charging time may differ depending on the conditions of use.

Summary of Contents for WI-XB400



































































































Search results

Summary of Contents for WI-XB400

Reviews:

Related manuals for WI-XB400

Brands by name

Popular brands

Sony WI-XB400, Help Manual

Search results

Summary of Contents for WI-XB400

Reviews:

Related manuals for WI-XB400

Brands by name

Popular brands