Sony WH-1000XM5, Quick Start Manual

Page: 93 / 146

Help Guide
Wireless Noise Canceling Stereo Headset
WH-1000XM5
Making a call
You can enjoy a hands-free call with a smartphone or mobile phone that supports the Bluetooth profile HFP (Hands-free
Profile) or HSP (Headset Profile), via Bluetooth connection.
If your smartphone or mobile phone supports both HFP and HSP, set it to HFP.
The operation may vary depending on the smartphone or mobile phone. Refer to the operating instructions supplied
with the smartphone or mobile phone.
Depending on the connected device or the application you are using, the functions may not work properly even if you
try to operate them with the headset.
Connect the headset to a smartphone/mobile phone via Bluetooth connection.
1
Operate your smartphone or mobile phone to make a call.
When you make a call, the dial tone is heard from the headset.
If you make a call while listening to music, playback pauses.
If no dial tone is heard via the headset, switch the call device to the headset by using your smartphone or mobile
phone or by holding your finger to the touch sensor control panel until the device is switched.
The headset has omnidirectional microphones. You can talk without worrying about the position of the microphone.
2
Adjust the volume using the touch sensor control panel.
Increase the volume: Swipe up repeatedly until the volume reaches the desired level.
Decrease the volume: Swipe down repeatedly until the volume reaches the desired level.
3
93