Sony WH-1000XM5, Quick Start Manual

Page: 91 / 146

Hint
When receiving a call by operating smartphones or mobile phones, some smartphones or mobile phones may receive a call with
the phone instead of the headset. With an HFP or HSP connection, switch the call to the headset by holding your finger to the
headset’s touch sensor control panel until it switches, or by using your smartphone or mobile phone.
Volume for a call can be adjusted during a telephone conversation only.
The headset volume during a call and during music playback can be independently adjusted. Changing the call volume does not
change the volume of music playback and vice versa.
Note
Depending on the connected device or playback application you are using, when you receive an incoming call while listening to
music, playback may not resume automatically even after you finish the call.
Use a smartphone or mobile phone at least 50 cm (19.69 in.) away from the headset. Noise may result if the smartphone or
mobile phone is too close to the headset.
Your voice will be heard from the headset through the headset’s left and right microphones (Sidetone function). In this case,
ambient sounds or the sounds of the headset operation may be heard through the headset, but this is not a malfunction.
Related Topic
How to make a wireless connection to Bluetooth devices
Making a call
Increase the volume: Swipe up repeatedly until the volume reaches the desired level.
Decrease the volume: Swipe down repeatedly until the volume reaches the desired level.
Change the volume continuously: Swipe up or down and hold. Release at the desired volume level.
When the volume reaches the maximum or minimum, an alarm sounds.
When you finish your phone call, tap the touch sensor control panel twice quickly (with an interval of about
0.4 seconds) to end the call.
If you received a call during music playback, music playback resumes automatically after ending the call.
4
91