Wireless Stereo Headset
WF-C500
Pairing and connecting with a Bluetooth device
The operation to register the device that you wish to connect to is called “pairing”. First, pair a device to use it with the
headset for the first time.
Before starting the operation, make sure of the following:
The Bluetooth device is placed within 1 m (3 feet) of the headset.
The headset is charged sufficiently.
The operating instructions of the Bluetooth device is in hand.
Remove both units of the headset from the charging case.
The headset turns on automatically. Check that the indicators (blue) flash.
1
Enter pairing mode on this headset.
When you pair the headset with a device for the first time after purchase or after initializing the headset (if the
headset has no pairing information), the headset enters pairing mode automatically if you remove the headset from
the charging case. In this case, proceed to step
.
When you pair a second or subsequent device (the headset has pairing information for other devices), press and
hold the buttons on both the left and right units for about 5 seconds.
Check that the indicator (blue) on both units of the headset repeatedly flashes twice in a row.
You will hear the voice guidance say “Bluetooth pairing” from both headset units at the same time.
2
Perform the pairing procedure on the Bluetooth device to search for this headset.
[WF-C500] will be displayed on the list of detected devices on the screen of the Bluetooth device.
3
62
