About the instruction manual video
Watch the video to find out how to perform the pairing for the first time.
https://rd1.sony.net/help/mdr/mov0028/h_zz/
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with your iPhone.
To delete all Bluetooth pairing information, see “
Initializing the headset to restore factory settings
Note
If pairing is not established within 5 minutes, pairing mode is canceled. In this case, set the headset into the charging case, and
start the operation again from step
.
Find the headset on the iPhone.
4
Select [Settings].
1.
Touch [Bluetooth].
2.
Touch the switch to turn on the Bluetooth function.
3.
Touch [WF-C500].
If Passkey (*) input is required, input “0000”.
The headset and iPhone are paired and connected with each other.
The indicators (blue) on both units of the headset flash quickly for about 5 seconds.
You will hear the voice guidance say “Bluetooth connected” from the unit of the headset that was removed first from
the charging case.
If they are not connected, see “
If [WF-C500] does not appear on the display of the iPhone, try again from the beginning of step
.
5
A Passkey may be called “Passcode”, “PIN code”, “PIN number”, or “Password”.
*
36
