36
Setup
Two VCRs for Tape
Editing
Connecting two VCRs lets you record from one VCR to the other. By
connecting them as shown below, you can view (monitor) what is being
recorded.
To connect two VCRs for tape editing
1
Use an A/V cable (not supplied) to connect the playback VCR’s A/V
output jacks to the recording VCR’s A/V input jacks.
2
Use an A/V cable (not supplied) to connect the recording VCR’s A/V
output jacks to the TV’s A/V input jacks (VIDEO 1 or 3).
Using S VIDEO jacks? See page 31.
R-AUDIO -L
VIDEO
(MONO)
S VIDEO
VIDEO IN
1
3
Rear of TV
Recording VCR
A/V cable
(not supplied)
Playback VCR
A/V cable
(not supplied)
When connecting two VCRs for tape editing;
– you cannot edit a tape with copy protection.
– do not connect the TV’s A/V input jack and output jack to
your VCRs at the same time to avoid looping the signal.
